Mohan Electronics & Systems

�� OPTIVISION : Technical Specifications — Signal Fire AI-5 PRO Core Splicing & Alignment

• Alignment Method: Six-motor core alignment system for precise fiber positioning with minimized splice loss.

• Splicing Time: ~8 seconds per splice (may vary with environment).

• Heating Time: ~18 seconds for standard splice protection sleeves (customizable).

• Splicing Modes: Automatic and semi-automatic. 

Optical Performance

• Typical Splice Loss:

  • Single-mode (SMF): ~0.02 dB

  • Multimode (MMF): ~0.01 dB

  • DS/NZDS: ~0.04 dB

• Return Loss: ≥ 60 dB (high back-reflection rejection).

Display & Imaging

• Screen: 5-inch TFT colour display.

• Magnification:

  • 320× single-axis focus view (X or Y)

  • 160× dual-axis view

Fiber Compatibility

• Supported Fiber Types:

  • Single-mode (G.652), multimode (G.651), dispersion-shifted (G.653), non-zero dispersion-shifted (G.655), and bend-insensitive fibers (G.657).

• Applicable Cables: Bare fiber, pigtail, drop cable, patch cord, invisible fiber.

• Fiber Cladding Diameter: 80 – 150 μm.

• Coating Diameter: 100 – 1000 μm.

• Fiber Cleave Length:

  • Coating < 250 μm: 8–16 mm

  • Coating 250 – 1000 μm: ~16 mm
    
    

    Battery & Power

    • Battery Type: 5200 mAh removable lithium battery.

    • Battery Life: ~160 splice + heating cycles on a full charge.

    • Charging Time: ≤ ~3.0 – 3.5 hours.

    • AC Power: AC 100–240 V input, DC 13.5 V/4.8 A output.

    Data & Connectivity

    • Storage: Stores splice records (locally and cloud via Bluetooth).

    • Wireless: Bluetooth 4.2 (2.4 GHz) up to ~60 m range.
      
      

      Mechanical & Environmental

      • Fiber Holders: 3-in-1 versatile fixture (no need to change holders).

      • Tension Test: Standard ~2 N.

      • Heat-Shrink Tube: Supports 25 / 40 / 50 / 60 mm sleeves.

      • Operating Temperature: ~-15 °C to +50 °C; humidity up to ~95 % RH (non-condensing).

      • Dimensions: ~198 × 135 × 122 mm.

      • Weight: ~1.91 kg (with battery).

      Additional Features

      • Built-in LED illumination for low-light environments.

      • Robust metal body with shock and dust resistance considerations.

      • Quick boot time: ~1 s to ready.

      The Signal Fire AI-5 PRO is widely used in FTTH rollout, CCTV/security installations, and general fiber network engineering applications where a balance of performance, portability, and cost-effectiveness is required.

       

A tool used to gauge an optical signal's power is an Optical Power Meter. Typically, the phrase refers to a tool used to measure average power in fibre optic systems. Other general-purpose light power measuring equipment is typically referred to as a radiometer, photometer, light metre, lux metre, or laser power metre.
We provide Optical Power Meter in the highest quality at the most affordable price to satisfy the needs of the customer.
Get the best price of the Optical Power Meter.

Digital QAM Meter :-

Operation of measurement.
Starting up
To turn meter on, press Power Switch button and hold until the meter lcd light on .
Then it accesses the mode of single channel measurement automatically.
Last channel & measurement mode restored from meter memory.
Single Channel Mode
1. CH+ & CH – for channel up down continuously.2. FAV+ & FAV – for your selected channel up down .3. FT+ & FT– for frequency up down .4. FAV SELECT for selecting frequently using channels .5. ACV BATTERY for measure ACV/DCV & battery status.6. MER/BER (ORANGE key) for measure MER & BER of Digital Channles.
TILT Channel Mode
1. TILT used for measure 3 channel .2. first channel showing absolute level & ch 2/ch3 show difference from first channel .3. Use CH1/CH2/CH3 up down key for selecting desired channel in TILT MODE .4 CHANNEL MODE1. 4 CH. this Mode for measure 4 channel level .2. Use ch1/ch2/ch3/ch4 up down key for desired channels .
Selecting ANALOG/DIGITAL/OPTICAL Mode .
1. Use analog/digital/optical key for select required mode .2. METER show only DIGITAL & OPTICAL MODE .3. IF you need ANALOG mode power off meter ,press & hold mode key (Pink key) &Power on meter now meter show analog mode .
SYMBOL RATE & QAM SETTING .
1. Select channel & press SET key .2. Select Plan no. By TILT key .3. Set QAM value by FAV SELECT key .4. Set Symbol Rate by CH1/CH2/CH3/CH4 up down key .5. Press SET key for save qam setting .
SPECIFICATION :
Analog CATV 

Frequency Range : 48 ~ 855 MhzLevel Range : 25 ~ 120 dBμVAccuracy : ± 2.0 dBRBW : 250 Khz
DVB – C
Frequency Range : 48 ~ 860 MhzLevel Range : 40 ~ 110 dBμVPower Level Accuracy : ± 2.0 dBMER Range : 25 ~ 40 dBMER Accuracy : ± 2.0 dBBER : 1E-3 ~ 1E-9SYMBOL RATE : 1 ~ 7.2 MSPSModulation Qam Type : 16/32/64/128/256
OPTICAL POWER METER
Optical power range -15 ~ +3 dBm
Other Feature & Interface
AC Voltage Reading : 10 ~ 90 VAC ± 2VDC Voltage Reading : 8 ~ 50 VDC ± 2VRF Input Connector : 75 Ω F (Female)Battery Type : Lion 7.4 V
Accessories
Li ion Battery Charger : 1 pcs.Soft carry Case : 1 pcs.F TO F JOINTER : 1 Pcs.Manual : 1 pcs.

Description :-
Support lighting & backlight switch.Support automatic shutdown.Support wavelength memory function.Support frequency identification.Support user calibration.Support SC/FC/ST interface.Support external power supplySupport simultaneous linear(mw) & non linear(dBm) display.
OPM :
Wave Range                    : 800nm ~ 1700nmInterface Type                : Universal Joint FC/SC/STTest Range                     : -50dbm ~ +26dBmUncertainty                    : +/- 5% Frequency Identification : CW/270/330/1K/2KHzCalibration wavelength   : 850/980/1300/1310/1490/1550/1625/1650nm
LS :
LD Type                        :  FP-LDWavelength                  :  1310nm/1550nm +/-20nmOutput Power               :  >-5dBmModulation Frequency  :  270/330/1K/2KHzStability                      :  CW, +/-0.5dB/15min.                                     ( Test after 15min. of preheating )Connector                   :  FC/UPC ( interchangeable SC, ST )
VFL:
Wavelength        :  650nm +/-20nm   Output Power     :  >10mWMode                 :  CW/1Hz/2HzConnector          :  FC/SC/ST
Other Parameter:
Display                      :  3.5  inch Colour LCD Data Interface           :  Micro USBExternal Storage        :  TF CardPower Supply             :  Polymer Li-Battery : 3.7V ~ 4000mAhAdaptor : 5VDC  -             Battery Life               :  Standby > 20h : Measuring time >12hOperating Temp.        :  -10 C ~ +50 CStorage Temp.           :  -40 C ~ +70 CRelative Humidity      :  0~95% Non CondensingSize                          :  173mm x 82mm x 37mmWeight                      :  <350 gMiniPro OTDR:
Wavelength                 :  1310nm/1550nm +/-20nm Fiber type                   :  G.652Dynamic Range           :  24dB/22dBEvent Blind Zone         :  3m ATT Blind Zone            :  8mTest Range                  :  500m ~ 64KmPulse Width                :  3ns ~ 10usRanging accuracy        :  +/- 1m + sampling intervel +0.005% x Test DistanceLoss accuracy             :  +/-0.2dB/dBSampling Points          :  16k~128kSampling resolution    :  0.05m~8mReflection accuracy    : +/-3dBData Storage              :  Internal : >600; External : TF CardLaser Safety Level      :  Class 2

We, Mohan Electronics & Systems, are a sole proprietorship company, engaged in manufacturing, Exporting and Importing finest quality array of CATV Products & Equipment. Our range includes Hybrid Semi Delux, Node Amplifier, Node cum Transmitters, DBM Optical Transmitters, Power Supply, 16 Channel Combiner, Adjacent Channel Modulator, Splicing Machine Electrode, etc. The offered products are developed in conformity with the international standards by our experienced professionals.

At their sophisticated production unit, our products manufactured using premium grade raw material and sophisticated technology. Valued by the clients for their features like low maintenance, compact designs, easy installation, durability and longer service life, these are provided to our clients, at the most competitive prices. Get best price of Splicing Machine Electrode.