Mohan Electronics & Systems

OPTIVISION 1GE + 3FE + 1VoIP XPON Single-Band ONT is a cost-effective optical network terminal designed for FTTH/FTTB access networks. It supports both GPON and EPON standards through XPON auto-adaptation, providing high-speed data services, stable VoIP communication, and wireless connectivity over a single-band Wi-Fi interface. The device is ideal for residential subscribers and small offices.

• PON Type: XPON (Auto-adaptive GPON / EPON)

• Standards Compliance:

  • ITU-T G.984 (GPON)

  • IEEE 802.3ah / 802.3av (EPON)

• Optical Connector: SC/APC or SC/UPC

• Wavelengths:

  • Downstream: 1490 nm

  • Upstream: 1310 nm

• Maximum Transmission Distance: Up to 20 km

• Optical Power Budget: Class B+ / C+ (optional)

• Ethernet Ports:

  • 1 × 10/100/1000 Mbps RJ-45 (GE)

  • 3 × 10/100 Mbps RJ-45 (FE)

  • Auto-negotiation and Auto MDI/MDIX supported

• Voice Port:

  • 1 × RJ-11 (VoIP)

• Protocol: SIP (RFC 3261)

• Voice Codec Support: G.711 (A-law / µ-law), G.729, G.722

• Voice Functions:

  • Call waiting, call forwarding, call transfer

  • Caller ID, voicemail

  • Echo cancellation, jitter buffer, silence suppression

• Wi-Fi Standard: IEEE 802.11 b/g/n

• Frequency Band: 2.4 GHz (Single Band)

• Maximum Wireless Rate: Up to 300 Mbps

• MIMO: 2 × 2

• Wireless Security:

  • WPA / WPA2 / WPA3

  • WPS support

• Router / Bridge modes

• NAT / NAPT

• PPPoE / DHCP / Static IP

• VLAN tagging (IEEE 802.1Q)

• QoS with traffic prioritization

• IPv4 / IPv6 dual stack

• IGMP Snooping / Proxy for IPTV services

• Remote Management: TR-069

• Local Management: Web GUI, CLI (Telnet / SSH – operator controlled)

• Monitoring:

  • Optical power level detection

  • Ethernet and VoIP port status

• Firmware Upgrade: Remote and local upgrade supported

• Built-in firewall

• MAC / IP / URL filtering

• DoS attack prevention

• User access control and authentication

• Power Supply: External DC adapter

• Input Voltage: 12V DC

• Power Consumption: ≤ 10 W

• Operating Temperature: 0°C to +40°C

• Storage Temperature: -40°C to +70°C

• Operating Humidity: 5% – 95% (non-condensing)

• Desktop or wall-mountable housing

• LED indicators: Power, PON, LOS, LAN, Wi-Fi, VoIP

2. PON Interface

• PON Type: XPON (Auto-adaptive GPON / EPON)

• GPON Standard: ITU-T G.984.x

• EPON Standard: IEEE 802.3ah

• Downstream / Upstream Rate:

  • Down : EPON: 1.25 Gbps / GPON: 2.488 Gbps 

  • Up : EPON : 1.25 Gbps / GPON 1.25Gbps

• Optical Connector: SC/UPC

• Fiber Type: Single-mode fiber (SMF), 9/125 µm

• Optical Wavelengths:

  • TX: 1310 nm / RX: 1490nm

• Optical Transmit Power: 0 ~ +4 dBm

• Receiver Sensitivity: ≤ –28 dBm

• Maximum Transmission Distance: Up to 20 km

• 1 × GE (10/100/1000 Mbps) RJ45 + 1 x FE (10/100 Mbps ) RJ45

• 1 × FXS (RJ11) VoIP Port

• Voice Protocol: SIP (RFC compliant)

• Voice Features:

  • Caller ID

  • Call waiting / call forwarding

  • Echo cancellation (G.165/G.168)

  • DTMF (RFC2833 / SIP INFO)

• XPON Auto-Detection: Automatic GPON / EPON switching

• Operating Modes: Bridge / Router

• WAN Features: PPPoE, DHCP Client, Static IP

• LAN Features: DHCP Server, NAT, Port Forwarding

• IP Support: IPv4 / IPv6 Dual Stack

• VLAN: 802.1Q VLAN, VLAN translation

• QoS: Traffic shaping, rate limiting, priority queues (802.1p / DSCP)

• Multicast: IGMP v1/v2/v3 Snooping & Proxy (IPTV support)

• Management Methods:

  • OMCI (GPON) / OAM / TR-069 / Web GUI

• Remote Management: Supported via OLT/ACS

• Firmware Upgrade: Remote & local upgrade supported

• Firewall protection

• MAC address filtering

• Port isolation

• DoS attack prevention

• Password-protected management access

• Power Supply: External DC adapter (12 V / 1–1.5 A)

• LED Indicators:

  • Power / PON / LOS / LAN / TEL
    
    

• Operating Temperature: –5 °C to +55 °C

• Storage Temperature: –40 °C to +70 °C

• Operating Humidity: 5 % – 95 % (non-condensing)

• Dimensions: Compact desktop design (approx. 160 × 120 × 30 mm)

• Weight: ~300 g

• Installation: Desktop / wall-mount

• FTTH broadband Internet access

• Residential VoIP voice services

• ISP triple-play deployments (Data + Voice)

• Small office / home office (SOHO) networks

OPTIVISION 1GE + 3FE + 1VoIP XPON Single-Band ONT is a cost-effective optical network terminal designed for FTTH/FTTB access networks. It supports both GPON and EPON standards through XPON auto-adaptation, providing high-speed data services, stable VoIP communication, and wireless connectivity over a single-band Wi-Fi interface. The device is ideal for residential subscribers and small offices.

• PON Type: XPON (Auto-adaptive GPON / EPON)

• Standards Compliance:

  • ITU-T G.984 (GPON)

  • IEEE 802.3ah / 802.3av (EPON)

• Optical Connector: SC/APC or SC/UPC

• Wavelengths:

  • Downstream: 1490 nm

  • Upstream: 1310 nm

• Maximum Transmission Distance: Up to 20 km

• Optical Power Budget: Class B+ / C+ (optional)

• Ethernet Ports:

  • 1 × 10/100/1000 Mbps RJ-45 (GE)

  • 3 × 10/100 Mbps RJ-45 (FE)

  • Auto-negotiation and Auto MDI/MDIX supported

• Voice Port:

  • 1 × RJ-11 (VoIP)

• Protocol: SIP (RFC 3261)

• Voice Codec Support: G.711 (A-law / µ-law), G.729, G.722

• Voice Functions:

  • Call waiting, call forwarding, call transfer

  • Caller ID, voicemail

  • Echo cancellation, jitter buffer, silence suppression

• Wi-Fi Standard: IEEE 802.11 b/g/n

• Frequency Band: 2.4 GHz (Single Band)

• Maximum Wireless Rate: Up to 300 Mbps

• MIMO: 2 × 2

• Wireless Security:

  • WPA / WPA2 / WPA3

  • WPS support

• Router / Bridge modes

• NAT / NAPT

• PPPoE / DHCP / Static IP

• VLAN tagging (IEEE 802.1Q)

• QoS with traffic prioritization

• IPv4 / IPv6 dual stack

• IGMP Snooping / Proxy for IPTV services

• Remote Management: TR-069

• Local Management: Web GUI, CLI (Telnet / SSH – operator controlled)

• Monitoring:

  • Optical power level detection

  • Ethernet and VoIP port status

• Firmware Upgrade: Remote and local upgrade supported

• Built-in firewall

• MAC / IP / URL filtering

• DoS attack prevention

• User access control and authentication

• Power Supply: External DC adapter

• Input Voltage: 12V DC

• Power Consumption: ≤ 10 W

• Operating Temperature: 0°C to +40°C

• Storage Temperature: -40°C to +70°C

• Operating Humidity: 5% – 95% (non-condensing)

• Desktop or wall-mountable housing

• LED indicators: Power, PON, LOS, LAN, Wi-Fi, VoIP

Optivision 4GE + 1VoIP XPON Dual-Band ONT is a high-performance optical network terminal designed for FTTH/FTTB deployments. It supports both GPON and EPON standards, providing high-speed broadband access, voice services, and dual-band Wi-Fi connectivity for residential and small business users.

• PON Type: XPON (Auto-adaptive GPON / EPON)

• Standards Compliance:

  • ITU-T G.984 (GPON)

  • IEEE 802.3ah / 802.3av (EPON)

• Optical Connector: SC/APC or SC/UPC

• Wavelengths:

  • Downstream: 1490 nm (GPON) / 1550 nm (optional)

  • Upstream: 1310 nm

• Transmission Distance: Up to 20 km

• Optical Power Budget: Class B+/C+/C++ (model dependent)

• Ethernet Ports:

  • 4 × 10/100/1000 Mbps RJ-45 (Auto-negotiation, Auto MDI/MDIX)

• Voice Port:

  • 1 × RJ-11 (VoIP)

• Protocol: SIP (RFC 3261)

• Codec Support: G.711, G.729, G.722, G.723

• Voice Features:

  • Call waiting, call forwarding, call transfer

  • Caller ID, voicemail

  • Echo cancellation and silence suppression

• Wi-Fi Standard: IEEE 802.11 a/b/g/n/ac

• Frequency Bands:

  • 2.4 GHz (up to 300 Mbps)

  • 5 GHz (up to 867 Mbps)

• MIMO: 2×2

• Security:

  • WPA/WPA2/WPA3

  • WPS (Push Button / PIN)

• NAT, Bridge, and Router modes

• PPPoE / DHCP / Static IP

• VLAN tagging (IEEE 802.1Q)

• QoS (Traffic classification and priority scheduling)

• IPv4 / IPv6 dual stack

• IGMP Snooping / Proxy (IPTV support)

• Remote Management: TR-069 / TR-369

• Local Management: Web GUI, Telnet / SSH (operator controlled)

• Monitoring:

  • Optical signal detection

  • Link status and performance statistics

• Firmware Upgrade: Remote and local upgrade supported

• Firewall (SPI)

• MAC/IP/URL filtering

• DoS attack protection

• User authentication and access control

• Power Supply: External DC adapter

• Input Voltage: 12V DC

• Power Consumption: ≤ 12 W

• Operating Temperature: 0°C to +40°C

• Storage Temperature: -40°C to +70°C

• Humidity: 5% – 95% (non-condensing)

• Compact desktop or wall-mount design

• LED indicators for PON, LOS, LAN, Wi-Fi, VoIP, Power

• 1 × XPON port: Auto-detects and supports both EPON (PX20+/PX20++) and GPON (Class B+) OLTs

• Optical connector: SC/UPC, single-mode fiber

• TX optical power: 0 to +4 dBm

• RX sensitivity: approx. ≤ –27 to –28 dBm

• Optical reach: up to 20 km

• Wavelength: TX 1310 nm / RX 1490 nm

Ethernet (LAN) Interfaces

• 2 × Gigabit Ethernet (10/100/1000 Mb/s) RJ45 ports for wired LAN or WAN connections

Voice (POTS) Port

• 1 × RJ11 POTS connector for telephony (VoIP) services, supporting SIP protocol and standard voice codecs (e.g., G.711, G.722, G.729) with features like echo cancellation and fax support.

Wi-Fi (Wireless)

• Dual-band Wi-Fi 5 (802.11b/g/n/ac):
  • 2.4 GHz and 5 GHz concurrent bands
  • Typical combined throughput up to ~1200 Mbps (AC1200)
  • 2×2 MIMO with external antennas for improved coverage
  • Multiple SSIDs supported 

• Wi-Fi Standards: IEEE 802.11b/g/n/ac

• 2.4 GHz band: 2.400–2.4835 GHz

• 5 GHz band: 5.150–5.825 GHz

• Antenna(s): Dual-band external antennas (typically ~5 dBi each)

• Wireless Features: EasyMesh support, MU-MIMO, multiple SSIDs, standard security (WPA/WPA2-PSK)

XPON & PON OAM

• OMCI/OAM support for remote provisioning and management from the OLT

• Automatic detection of GPON or EPON mode

Network & Routing Features

• Bridge, router, or mixed operating modes

• IPv4 & IPv6 dual stack

• NAT, DHCP client/server, PPPoE, static IP support

• QoS with multiple queues, SP/WRR scheduling, 802.1p & DSCP prioritization

VLAN & Multicast

• VLAN tagging/trunk/translation modes

• IGMP v1/v2/v3 snooping/proxy, MLD snooping/proxy

Security & Access Controls

• Firewall / ACL filtering

• MAC or URL-based filtering

• Wireless security (WPA/WPA2-PSK)

• SIP protocol support (IMS compatible)

• Voice codecs: G.711, G.722, G.729 (auto-negotiation)

• Echo cancellation (ITU-T G.165/G.168)

• Fax modes including T.38, relay methods (RFC2833)

• Typical calling features: Caller ID, call waiting, call forward, conference, etc.
  
  

   Power & Physical

  • Power supply: External DC adapter (typically 12 V, 1.0–1.5 A)

  • Power consumption: ~≤ 10 W

  • Weight: ~0.30–0.32 kg

  • Operating temperature: ~0 °C to +55 °C

  Typical Use Cases

  • FTTH broadband access with GPON or EPON OLTs

  • Triple-play services: Internet, IPTV, and VoIP voice

  • SOHO/home gateway with dual-band Wi-Fi and multiple services

  • Easy network management via TR-069, OMCI, Web/CLI interfaces

• Brand : OPTIVISION

• Model: OV-E-04 (4 GPON ports)

• Manufacturer: V-SOL (V-Solution Telecom)

• Form Factor: 1U 19″ rack-mount chassis

• Application: GPON access for FTTH, FTTB, mixed broadband services 

• GPON Ports: 4 × GPON optical interfaces (SFP slots)

• GPON Standards: ITU-T G.984 compliant (typical GPON rates)

• Downstream Rate: 2.488 Gbps per port

• Upstream Rate: 1.244 Gbps per port

• Max Splitting Ratio: ≤ 1:128

• Optical Reach: Up to 20 km (single-mode fiber)

• Wavelengths: TX 1490 nm, RX 1310 nm

• Connector: SC/UPC

• Fiber Type: 9/125 µm single-mode fiber (SMF)

• Supported GPON Module Levels: Class B+, C, C+, C++, C+++
  
  

  🔗 Uplink & Management Interfaces

  • Uplink Ports:
    • 2 × 1 GbE RJ45
    • 2 × 10 GbE SFP+ – high-capacity uplink to core/switch

  • Management Interfaces:
    • 1 × 10/100/1000 BASE-T out-of-band LAN
    • 1 × Console (serial)
    • 1 × USB2.0 (for configuration/logging)

  🧠 Capacity & Performance

  • Backplane Bandwidth: ~104 Gbps

  • Forwarding Rate: ~47.6 Mpps

  • Estimated ONU Support: Up to ~512 ONUs (approx. 128 per GPON port)
    
    

    🛠️ Network Features

    • Layer 2/Layer 3: VLAN, QinQ, STP/RSTP, IGMP snooping, routing (RIP/OSPF on some builds)

    • QoS & Traffic Control: Multi-queue, traffic shaping, priority scheduling

    • Security & Access: ACL filtering, storm control, port isolation (feature availability may vary)

    • Management Protocols: EMS (Element Management System), Web GUI, CLI, SNMP, Telnet
      
      

      ⚡ Power & Environment

      • Power Supply: AC 100 – 240 V (47/63 Hz); supports DC −36 V to −75 V in some configurations

      • Power Consumption: ~35 W

      • Operating Temp: −20 °C to +60 °C

      • Storage Temp: −40 °C to +70 °C

      • Humidity: 5 – 95 % (non-condensing)
        
        

        📏 Physical Characteristics

        • Dimensions: ~442 × 220 × 43.6 mm (L×W×H)

        • Net Weight: ~2.95 kg
          
          

          🛡️ Typical Use Cases

          • FTTH/FTTB Access Networks for residential and enterprise broadband distribution

          • ISP Aggregation and backbone connectivity via high-speed uplinks

          • Triple-Play Services (Internet, IPTV, VoIP) deployment
            
             

           

         

       

     

   

• Brand: OPTIVISION

• Model: OV-G08 (8 GPON ports)

• Type: GPON OLT (Optical Line Terminal) for fiber access networks (FTTx)

• Chassis: 1U 19″ rack-mountable pizza-box style enclosure (steel shell)

• Application: GPON broadband access (FTTH/FTTB/FTTM)

• Deployment: ISP, enterprise, campus fiber networks

GPON Ports (Passive Optical Network)

• Number of GPON ports: 8 x GPON interfaces (SFP slots)

• Supported PON modules: Class B+, C, C+, C++, C+++ (optical module grades)

• Max splitting ratio: Up to 1:128 (typical PON split)

• Transmission distance: Up to 20 km

• GPON speeds:
  • Upstream: 1.244 Gbps
  • Downstream: 2.488 Gbps

• Wavelengths:
  • TX: 1490 nm (downstream)
  • RX: 1310 nm (upstream)

• Connector type: SC/UPC

• Fiber type: 9/125 µm SMF (single-mode fiber)

• Uplink Ports:
  • 4 × RJ45 Gigabit Ethernet (1 GbE)
  • 2 × 1 GbE SFP ports
  • 2 × 10 GbE SFP+ ports

• Management Interfaces:
  • 1 × 10/100/1000 BASE-T out-of-band LAN
  • 1 × Console (serial)
  • Optionally USB (varies by model version)

• Backplane bandwidth: ~104 Gbps

• Forwarding rate: ~68.448 Mpps (million packets per second)

• PON ONUs supported: Potentially hundreds of ONUs across all GPON ports (dependent on network design and split ratio)
  
  

  ⚙️ Features & Protocol Support

  Network & Protocol Support

  • Full GPON compliant with ITU-T G.984 series (standard GPON)

  • Layer-2 functions: VLAN, QinQ, multicast (IGMP snooping), QoS

  • Layer-3 routing options (some firmware versions support dynamic routing like RIP/OSPF)

  • Security features: firewall, ACL filters, storm control
    
    

    Management

    • CLI (Console/Telnet/SSH)

    • Web GUI

    • SNMP

    • EMS (Element Management System)

    • TR-069 (on some firmware versions)

    
    

     

    ⚡ Power & Environmental

    • Power Supply:
      • AC: 100–240 VAC
      • Optional DC: –36 V to –75 V

    • Power consumption: ~45 W (varies by model and loaded configuration)

    • Operating temperature: –20 °C to +60 °C

    • Storage temperature: –40 °C to +70 °C

    • Relative humidity: 5 – 95 % (non-condensing) 

   

  📏 Physical Characteristics

  • Dimensions: ~442 × 319 × 43.6 mm (L × W × H)

  • Net weight: ~4.05 kg 

• 🛠️ Typical Use Cases

  • GPON broadband access for residential and commercial users

  • ISP aggregation node with high upstream/downstream throughput

  • Triple-play services (data + IPTV + VoIP)

  • Smart building and campus fiber backbone networks 

Brand name : OPTIVISION
Model family: V-SOL 4-Port EPON OLT (e.g., V1600D4, V1600D4-DP, V1600D4-BT)
Form factor: 1U, 19″ rack-mount chassis
Application: FTTH/FTTB broadband access
Supported ONU: Up to ~256 ONUs (approx. 64 ONUs per PON port) 

PON (Downstream) Ports

• 4 × EPON Ports (SFP Slots) — optical PON interfaces

• Transmission rate: Symmetric 1.25 Gbps downstream & upstream per port

• Wavelengths: TX 1490 nm (down), RX 1310 nm (up)

• Optical reach: Up to 20 km (typical)

• Max Optical Split Ratio: ≤ 1:64

• Connector type: SC/UPC

• Fiber type: 9/125 µm single-mode fiber (SMF)

Uplink Ports (varies by sub-model):

• 4 × RJ45 1 GbE (copper)

• 4 × 10 GbE SFP+ (optional)
  (This mix provides flexible uplink capacity for aggregation and network core links)1 

Management & Console:

• 1 × 10/100 BASE-T management (out-of-band)

• 1 × Console (serial)

• Some variants include USB for local logging or config
  
  

  Performance & Capacity

  • Backplane bandwidth: ~128 Gbps

  • Forwarding rate: ~71.4 Mpps (million packets per second)

  • ONU support: Up to ~256 ONUs total (≈64 per PON)
    
    

    ⚙️ Key Protocol & Feature Support

    EPON Functions (IEEE 802.3ah compliant):

    • Dynamic Bandwidth Allocation (DBA)

    • Auto-discovery, link detection, remote software upgrade

    • VLAN tagging/untagging, port VLANs, QoS per LLID

    • Multiple LLID configurations or single LLID

    • Port-based rate limiting & bandwidth control

    • Multicast support & broadcast storm mitigation

    Management & Security:

    • EMS (Element Management System), Web GUI, CLI, SNMP, Telnet, SSHv2

    • DHCP option 82, DHCP snooping, IEEE 802.1x, RADIUS/TACACS+ support (depending on firmware)
      
      

      ⚡ Power, Environmental & Physical

      • Power supply: AC 100–240 V (some models support DC −48 V & BBU backup)

      • Power consumption: ~30 – 35 W typical

      • Operating temperature: ~0 °C – +50 °C (up to –20 °C – +60 °C on some builds)

      • Storage temperature: –40 °C – +85 °C

      • Humidity: 5 – 95 % non-condensing

      • Dimensions: ~442 × 200 × 43.6 mm

      • Weight: ~3.2 kg
        
        

        Summary & Typical Use

        The V-SOL 4-PON EPON OLT series is ideal for small to medium-scale fiber access deployments, including:

        • FTTH/FTTB triple-play broadband access

        • ISP aggregation points

        • Enterprise and campus fiber aggregation

        • Managed broadband service delivery

        It balances port count, uplink flexibility, and Layer-2/Layer-3 features to meet diverse access network requirements. 

       

Brand name : OPTIVISION
Model family: V-SOL 4-Port EPON OLT (e.g., V1600D4, V1600D4-DP, V1600D4-BT)
Form factor: 1U, 19″ rack-mount chassis
Application: FTTH/FTTB broadband access
Supported ONU: Up to ~256 ONUs (approx. 64 ONUs per PON port) 

PON (Downstream) Ports

• 4 × EPON Ports (SFP Slots) — optical PON interfaces

• Transmission rate: Symmetric 1.25 Gbps downstream & upstream per port

• Wavelengths: TX 1490 nm (down), RX 1310 nm (up)

• Optical reach: Up to 20 km (typical)

• Max Optical Split Ratio: ≤ 1:64

• Connector type: SC/UPC

• Fiber type: 9/125 µm single-mode fiber (SMF)

Uplink Ports (varies by sub-model):

• 4 × RJ45 1 GbE (copper)

• 4 × 10 GbE SFP+ (optional)
  (This mix provides flexible uplink capacity for aggregation and network core links)1 

Management & Console:

• 1 × 10/100 BASE-T management (out-of-band)

• 1 × Console (serial)

• Some variants include USB for local logging or config
  
  

  🧠 Performance & Capacity

  • Backplane bandwidth: ~128 Gbps

  • Forwarding rate: ~71.4 Mpps (million packets per second)

  • ONU support: Up to ~256 ONUs total (≈64 per PON)
    
    

    ⚙️ Key Protocol & Feature Support

    EPON Functions (IEEE 802.3ah compliant):

    • Dynamic Bandwidth Allocation (DBA)

    • Auto-discovery, link detection, remote software upgrade

    • VLAN tagging/untagging, port VLANs, QoS per LLID

    • Multiple LLID configurations or single LLID

    • Port-based rate limiting & bandwidth control

    • Multicast support & broadcast storm mitigation

    Management & Security:

    • EMS (Element Management System), Web GUI, CLI, SNMP, Telnet, SSHv2

    • DHCP option 82, DHCP snooping, IEEE 802.1x, RADIUS/TACACS+ support (depending on firmware)
      
      

      ⚡ Power, Environmental & Physical

      • Power supply: AC 100–240 V (some models support DC −48 V & BBU backup)

      • Power consumption: ~30 – 35 W typical

      • Operating temperature: ~0 °C – +50 °C (up to –20 °C – +60 °C on some builds)

      • Storage temperature: –40 °C – +85 °C

      • Humidity: 5 – 95 % non-condensing

      • Dimensions: ~442 × 200 × 43.6 mm

      • Weight: ~3.2 kg
        
        

        🛠️ Summary & Typical Use

        The V-SOL 4-PON EPON OLT series is ideal for small to medium-scale fiber access deployments, including:

        • FTTH/FTTB triple-play broadband access

        • ISP aggregation points

        • Enterprise and campus fiber aggregation

        • Managed broadband service delivery

        It balances port count, uplink flexibility, and Layer-2/Layer-3 features to meet diverse access network requirements. 

       

     

   

• 8 × EPON Ports in SFP slots

• Supported PON module types: PX20, PX20+, PX20++, PX20+++

• Transmission rate: Symmetric 1.25 Gbps upstream & downstream per PON port

• Max Optical Split Ratio: 1:64

• Optical reach: Up to 20 km over single-mode fiber

• Wavelengths: TX 1490 nm / RX 1310 nm

• Connector: SC/UPC

• Fiber type: 9/125 μm SMF (singlemode fiber)

• Uplink Ports:

  • 8 × RJ45 Gigabit Ethernet (10/100/1000 Mbps)

  • 4 × 1G SFP Slots

  • 4 × 10G SFP+ Slots

• Management Ports:

  • 1 × 10/100 BASE-T out-of-band

  • 1 × Console (serial)

• Chassis: 1U, 19-inch rack-mountable design

• Backplane Bandwidth: ~128 Gbps (non-blocking)

• Forwarding Rate: ~89.28 Mpps

• Maximum ONUs Supported: Up to ~512 (approx. 64 per PON port)

• VLAN Support: Up to 4096 VLANs, QinQ, VLAN tag/untag, VLAN transparent

• Complies with IEEE 802.3ah EPON

• QoS based on port, VLAN ID, TOS, and MAC address

• IGMP Snooping for efficient multicast

• DHCP server support

• ONU online configuration & management

• VLAN, QinQ, and protocol VLAN support

• ACL (Access Control List) and security filtering

• Optional dynamic routing (RIP, OSPF) and IPv6 features (RIPng, SLAAC) on some firmware builds
  
  Management & Security

  • Management via EMS, Web UI, CLI, SNMP, Telnet, SSHv2

  • DHCP snooping, 802.1x, RADIUS/TACACS+ possible depending on firmware

  • Storm control, port isolation, ACL filters

• ⚡ Physical / Electrical Characteristics

  • Dimensions: ~442 × 319 × 43.6 mm (L × W × H)

  • Weight: ~4.5 kg

  • Power Supply:

    • AC: 100–240 VAC

    • DC: –36 V to –75 V (–48 V typical)

  • Power Consumption: ~55 W typical

  • Operating Temp: –20 °C to +60 °C

  • Storage Temp: –40 °C to +70 °C

  • Humidity: 5 – 95 % non-condensing

•  Deployment Scenarios

  Typical applications include:

  • FTTH/FTTB broadband access

  • Enterprise LAN aggregation

  • Triple-play services (data, VoIP, IPTV)

  • Smart-city and IoT backhaul deployments

  The unit supports flexible uplink combinations and robust management suited for ISP and large network environments.

• 8 × EPON Ports in SFP slots

• Supported PON module types: PX20, PX20+, PX20++, PX20+++

• Transmission rate: Symmetric 1.25 Gbps upstream & downstream per PON port

• Max Optical Split Ratio: 1:64

• Optical reach: Up to 20 km over single-mode fiber

• Wavelengths: TX 1490 nm / RX 1310 nm

• Connector: SC/UPC

• Fiber type: 9/125 μm SMF (singlemode fiber)

• Uplink Ports:

  • 8 × RJ45 Gigabit Ethernet (10/100/1000 Mbps)

  • 4 × 1G SFP Slots

  • 4 × 10G SFP+ Slots

• Management Ports:

  • 1 × 10/100 BASE-T out-of-band

  • 1 × Console (serial)

• Chassis: 1U, 19-inch rack-mountable design

• Backplane Bandwidth: ~128 Gbps (non-blocking)

• Forwarding Rate: ~89.28 Mpps

• Maximum ONUs Supported: Up to ~512 (approx. 64 per PON port)

• VLAN Support: Up to 4096 VLANs, QinQ, VLAN tag/untag, VLAN transparent

• Complies with IEEE 802.3ah EPON

• QoS based on port, VLAN ID, TOS, and MAC address

• IGMP Snooping for efficient multicast

• DHCP server support

• ONU online configuration & management

• VLAN, QinQ, and protocol VLAN support

• ACL (Access Control List) and security filtering

• Optional dynamic routing (RIP, OSPF) and IPv6 features (RIPng, SLAAC) on some firmware builds
  
  
  

  🔐 Management & Security

  • Management via EMS, Web UI, CLI, SNMP, Telnet, SSHv2

  • DHCP snooping, 802.1x, RADIUS/TACACS+ possible depending on firmware

  • Storm control, port isolation, ACL filters

  
  

   

• ⚡ Physical / Electrical Characteristics

  • Dimensions: ~442 × 319 × 43.6 mm (L × W × H)

  • Weight: ~4.5 kg

  • Power Supply:

    • AC: 100–240 VAC

    • DC: –36 V to –75 V (–48 V typical)

  • Power Consumption: ~55 W typical

  • Operating Temp: –20 °C to +60 °C

  • Storage Temp: –40 °C to +70 °C

  • Humidity: 5 – 95 % non-condensing

• 🛠️ Deployment Scenarios

  Typical applications include:

  • FTTH/FTTB broadband access

  • Enterprise LAN aggregation

  • Triple-play services (data, VoIP, IPTV)

  • Smart-city and IoT backhaul deployments

  The unit supports flexible uplink combinations and robust management suited for ISP and large network environments.

1.1 4+2FE PoE Switch – Technical Specifications

• Short Circuit Protection

• Overload Protection

• Over Voltage Protection

• Per-port PoE power priority

• ESD Protection: ±8kV (Air), ±6kV (Contact)

1.1 4+2FE PoE Switch – Technical Specifications

• Short Circuit Protection

• Overload Protection

• Over Voltage Protection

• Per-port PoE power priority

• ESD Protection: ±8kV (Air), ±6kV (Contact)

4 PON Ports EPON OLT

PTF3004

ProductDescription：

PTF3004 economical and high performance EPON OLT is a 1U standard rack-mounted equipment complying with IEEE802.3ah, YD / T 1475-2006 and CTC 2.0、2.1 and 3.0.It has flexible, easy to deploy, small size, high performance and other characteristics. The product is particularly suitable for residential broadband fiber access (FTTx), telephone and television, the power consumption information collection, video surveillance, networking, private network applications and other applications.

PTF3004 has 4 PON ports, 8 uplink ports (4*GE copper RJ45 ethernet ports, 4*SFP(GE)). Each of PON port supports up to 64 ONUs, the whole device supports up to 256 ONUs. Small size OLT, easy to install, convenient, flexible and easy to deploy high performance broadband access network. It is appropriate to be deployed in compact room environment. The OLTs can also be used for“Triple-Play”applications.

Features：

Ø1U 19 inch standard box EPON OLT with 4 PON ports

ØCompliant with IEEE802.3ah YD/T1475-2006—EPON and China Telecom EPON Technical Requirements

ØQoS based on port, VID, TOS and MAC address(32K Mac address)

ØSupport priority queue scheduling, support SP, WRR or SP + WRR scheduling algorithm

ØSupport 4096 VLAN, transparent transmission and conversion, support VLAN stacking (QinQ)

ØSupport 32K MAC’s line speed learning and aging, support MAC address restriction

ØSupport IEEE 802.1d (STP), 802.1w (RSTP) and MSTP Spanning Tree Protocol

ØSupport multicast Groups, IGMP v1/v2 snooping and IGMP Proxy

ØSupport port-based rate limitation and bandwidth control

ØSupport PON line AES and triple churing encryption

ØSupport Dynamic Bandwidth Allocation (DBA)

ØSupport ONU auto-MAC binding and filtering, support the ONU offline business configuration and automatically configure, manual/auto authentication

ØSupport the use of the ACL rules for packet filtering

ØSupport SNMP, telnet, CLI, OAM and Web management

ØProvide logs, alarms and performance statistics

• Extremely low power consumption, low heat, stable performance
• 10/100 Mbps Single Mode Single Fiber Media Converter Auto negotiation function allows UTP ports to auto select 10/100 M
• Supporting the max 1536 byte Ethernet packet, Supporting flow control
• Support flow control and reduce broadcast packets Supporting STP to form a redundant network
• Packet size up to1518bytes Support 9K Jumbo Frame Supporting VLAN / VoIP /QoS packets