Mohan Electronics & Systems

Optivision Model no.1010 is Optical Transmitter withDual power supply and Dual optic laser output. This Transmitter is based on DFB (distribution feed back)Technology for transmission of optic signal at 1310nmand (optional)1550nm for multi analog and digital channels CATV transmission. The DFB technology withRF PDC (pre-distortion circuit) have been incorporatetop achieve excellent C/N performance for cable TVnetwork. This optivision transmitter have AGC & MGCboth control for easy to handle RF input signal.This transmitter is constructed with SMD technology togive high quality enable it to meet or exceed its performance.

Features:

• High Quality DFB Fresh Laser.
• MCU based Laser Parameters.
• Low noise GaAs Amplifier module.
• Self Protecting AGC & MGC control.
• Advanced RF Pre-distortion Circuit.

Optivision Model no.1310 is Optical Transmitter with Dual power supply and Dual optic laser output. This Transmitter is based on DFB (distribution feed back) Technology for transmission of optic signal at 1310nm and (optional)1550nm for multi analog and digital channels CATV transmission. The DFB technology with RF PDC (pre-distortion circuit) have been incorporate top achieve excellent C/N performance for cable TV network. This optivision transmitter have AGC & MGC both control for easy to handle RF input signal. This transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance.

Optivision Model no.4050 is Optical Transmitter cum opticalreceiver. Its give both RF as well as optical output.The Transmitter function in this model is designed to give 10dbm optical output where network have only lower opticalthere. This model is economical for small and big networks. The transmission of optic signal at 1310nm and (optional)1550nmfor carry multi analog and digital channels CATV transmission. This optivision transmitter have MGC (manual gain control)for easy to handle RF input signal. The optivision transmitteris constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with 12VDCpower supply and have very low power consumption.

Optivision Model no.6050 is DC OPTICAL TRANSMITTER (3-in-1) with AGC.
Its give both RF as well as optical output.The Transmitter function in this model is designed to give 10+10+10+10dbm optical output where network have only lower optical Power.
This model is economical for small and big networks. 

The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. 

This optivision transmitter have MGC (Manual gain control) & AGC ( Automatic Gain Control )for easy to handle RF input signal.
This transmitter is constructed with SMD technology to give high quality & enable it to meet or exceed its performance.
Its is operated with 12VDC power supply and have very low power consumption.

This products offer a high performance to the customers and they are used for a range of applications.

Features:

• High MER & LOW BER
• Operated DC Adaptor : 12V-1Amp. 
• AGC
• MGC
• 3-in-1 :-
• Optical Input & RF Output
• RF Input & Optical Output
• Optical Input & Optical Output
• Aluminium Housing
• SMD Technology using SMD Components
• 6 LED Bar Dispaly for Optical Input
• Optical Output : 10x4 dBm

Specifications :-

Optical :-
Wavelength   : 1310nm
Optical Output : 10dBmx4 (40mw).
Optical Input : +2dbm ~ -5dbm.
Optical connector : SC/APC.
High Quality DFB Fresh Laser.

RF:-
Frequency : 40-900MHz Bandwidth.
RF Output level @ 0dbm : 85db.
Low noise 
MGC control.Excellent C/N, CSO & CTB.
12VDC power supply.
AGC ( Automatic Gain Control )

Optivision Model no.6050 is Battery Back-up Optical Transmitter of 10x4dBm output with latest 3-in-1 technology.
Its give both RF as well as optical output.The Transmitter function in this model is designed to give 40mw - 10x4dBm optical output where network have only lower opticalthere.
This Optical Transmitter has Battery back-up for 24Hrs.
This model is economical for small and big networks. The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. This optivision transmitter have MGC (manual gain control) & AGC ( Automatic gain Control ) for easy to handle RF input signal.
The optivision transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance.
Its is operated with 12VDC power supply / Solar and have very low power consumption.

Optical :-Wavelength   : 1310nm (1550nm Optional)Optical Output : 10x4dBm (40mw).Optical Input : +2dbm ~ -5dbm.Optical connector : SC/APC.High Quality DFB Fresh Laser.
RF:-Frequency : 40-900MHz Bandwidth.RF Output level @ 0dbm : 85db.Low noise.MGC control.
AGC ControlExcellent C/N, CSO & CTB.12VDC power supply.Battery Back-up : 24Hr. 
High MER & Low BER

Optivision Model no.5050 is Battery Back-up Optical Transmitter of 10+10dBm output with latest 3-in-1 technology.
Its give both RF as well as optical output.The Transmitter function in this model is designed to give 20mw - 10x2dBm optical output where network have only lower opticalthere.
This Optical Transmitter has Battery back-up for 24Hrs.
This model is economical for small and big networks. The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. This optivision transmitter have MGC (manual gain control) & AGC ( Automatic gain Control ) for easy to handle RF input signal.
The optivision transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance.
Its is operated with 12VDC power supply / Solar and have very low power consumption.

Optical :-Wavelength   : 1310nm (1550nm Optional)Optical Output : 10+10dBm (20mw).Optical Input : +2dbm ~ -5dbm.Optical connector : SC/APC.High Quality DFB Fresh Laser.
RF:-Frequency : 40-900MHz Bandwidth.RF Output level @ 0dbm : 85db.Low noise.MGC control.
AGC ControlExcellent C/N, CSO & CTB.12VDC power supply.Battery Back-up : 24Hr. 
High MER & Low BER

Optivision Model no.1040 is Optical Transmitter withDual power supply and Quad optic laser output.
This Transmitter is based on DFB (distribution feed back)Technology for transmission of optic signal at 1310nmand (optional)1550nm for multi analog and digital channels CATV transmission.
The DFB technology with RF PDC (pre-distortion circuit) have been incorporate top achieve excellent C/N performance for cable TV network.
This optivision transmitter have AGC & MGC both control for easy to handle RF input signal. This Transmitter have Power Doubler Integrated Circuit Module for High MER & Low BER.This transmitter is constructed with SMD technology togive high quality enable it to meet or exceed its performance.

Features:

• High MER & LOW BER
• Operated DC Adaptor : 12V-1Amp. 
• AGC
• MGC
• 3-in-1 :-
• Optical Input & RF Output
• RF Input & Optical Output
• Optical Input & Optical Output
• Aluminium Housing
• SMD Technology using SMD Components
• 6 LED Bar Dispaly for Optical Input
• Optical Output : 10x4 dBm

Specifications :-

Optical :-
Wavelength   : 1310nm
Optical Output : 10dBmx4 (40mw).
Optical connector : SC/APC.
High Quality DFB Fresh Laser.

RF:-
Frequency : 40-900MHz Bandwidth.
RF Input : 75-85db.
Low noise 
MGC control.Excellent C/N, CSO & CTB.
Dual SMPS Power Supply 150V-260VAC
AGC ( Automatic Gain Control )

Optivision Model no.5000 is DC OPTICAL TRANSMITTER (3-in-1) with AGC.
Its give both RF as well as optical output.The Transmitter function in this model is designed to give 10dbm optical output where network have only lower optical Power.
This model is economical for small and big networks. 

The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. 

This optivision transmitter have MGC (Manual gain control) & AGC ( Automatic Gain Control )for easy to handle RF input signal.
This transmitter is constructed with SMD technology to give high quality & enable it to meet or exceed its performance.
Its is operated with 12VDC power supply and have very low power consumption.

This products offer a high performance to the customers and they are used for a range of applications.

Features:

• High MER & LOW BER
• Operated DC Adaptor : 12V-1Amp. 
• AGC
• MGC
• 3-in-1 :-
• Optical Input & RF Output
• RF Input & Optical Output
• Optical Input & Optical Output
• Aluminium Housing
• SMD Technology using SMD Components
• 6 LED Bar Dispaly for Optical Input

Specifications :-

Optical :-Wavelength   : 1310nm.
Optical Output : 10dBm+10dBm (20mw).
Optical Input : +2dbm ~ -5dbm.
Optical connector : SC/APC.
High Quality DFB Fresh Laser.

RF:-
Frequency : 40-900MHz Bandwidth.
RF Output level @ 0dbm : 85db.
Low noise.
MGC & AGC control.
Excellent C/N, CSO & CTB.
12VDC power supply.

Optivision Model no.OV-1550-999 is Optical Transmitter with "BUTTERFLY LASER" Single power supply and 1550nm 10dBm laser output. This Transmitter is based on DFB (distribution feed back) Technology for transmission of optic signal at 1550nm and (optional)1310nm for multi analog and digital channels CATV transmission. The DFB technology with RF PDC (pre-distortion circuit) have been incorporate top achieve excellent C/N performance for cable TV network. This optivision transmitter have AGC & MGC both control for easy to handle RF input signal. This transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance.

Optivision model no. 5000 is Optical transmitter cum optical receiver. Its give both RF as well as Optical Output. The transmitter function in this model is designed to give 10dBm optical output where network have only lower optical there. This model is economical for small & big networks. The transmission of optical signal at 1310nm & (Optional) 1550nm for carry multi analog & digital channels for CATV Transmission .

Optivision model no. 6050 is Optical transmitter cum optical receiver. Its give both RF as well as Optical Output. The transmitter function in this model is designed to give 10dBm optical output where network have only lower optical there. This model is economical for small & big networks. The transmission of optical signal at 1310nm & (Optional) 1550nm for carry multi analog & digital channels for CATV Transmission .

Optivision Model no.4000 is DC OPTICAL TRANSMITTER (3-in-1) with AGC.
Its give both RF as well as optical output.The Transmitter function in this model is designed to give 10dbm optical output where network have only lower optical Power.
This model is economical for small and big networks. 

The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. 

This optivision transmitter have MGC (Manual gain control) & AGC ( Automatic Gain Control )for easy to handle RF input signal.
This transmitter is constructed with SMD technology to give high quality & enable it to meet or exceed its performance.
Its is operated with 12VDC power supply and have very low power consumption.

This products offer a high performance to the customers and they are used for a range of applications.

Features:

• High MER & LOW BER
• Operated DC Adaptor : 12V-1Amp. 
• AGC
• MGC
• 3-in-1 :-
• Optical Input & RF Output
• RF Input & Optical Output
• Optical Input & Optical Output
• Aluminium Housing
• SMD Technology using SMD Components
• 6 LED Bar Dispaly for Optical Input

Specifications :-

Optical :-Wavelength   : 1310nm.
Optical Output : 10dBm (10mw).
Optical Input : +2dbm ~ -5dbm.
Optical connector : SC/APC.
High Quality DFB Fresh Laser.

RF:-
Frequency : 40-900MHz Bandwidth.
RF Output level @ 0dbm : 85db.
Low noise.
MGC & AGC control.
Excellent C/N, CSO & CTB.
12VDC power supply.